Terrarium
60 min
14 hrs
- files
- recipe
You'll Need
- Two Mayku Casting Sheets
- Ready-mix concrete powder
- Water
- Modelling clay
- Decorative materials
materials
- Scissors
- Disposable container
- Mixing stick
- Sandpaper
tools
Steps
- 1
- 2
- 3
- 4
Prepare the templates for the terrarium base and cover. Here we’re using 3D prints, but you could use wood or clay.
Take a Mayku Cast Sheet from the pack.
Peel the protective film from the top of the sheet. Remember, you can put this into household recycling.
Place the sheet in the FormBox, and start to heat the plastic.
Place the upper template on the centre of the vacuum plate.
Watch the plastic as it ripples at the edges and begins to droop in the middle.
Form the template with the Mayku Cast Sheet.
Allow the mold to cool and gently pop the template out.
Carefully cut away the excess with a pair of scissors.