Concrete Soap Dish
- Mayku Casting Sheet
- Ready-mix concrete powder
- Earth pigments
- Disposable container
- Mixing stick
Prepare the template for the soap dish. Here we’re using a 3D print, but you could use wood or clay.
Take a Mayku Cast Sheet from the pack.
Peel the protective film from the top of the sheet. Remember, you can put this into household recycling
Place the sheet in the FormBox, and start to heat the plastic.
Place the outer template in the centre of the vaccum plate.
Watch the plastic as it ripples at the edges and begins to droop in the middle.
Form the template with the Mayku Cast Sheet.
Leave to cool slightly before removing from the FormBox.
Separate your template from the mold by applying firm pressure to the top of the form.
What to make next
Make colourful, customised coasters that will look great around the home.